Contact Us
|
Contact Info
3195 Red Hill Avenue, STE H 92626, Costa Mesa, CA, USA
Phone: 714-771-2502 (Press 1 for Sales, 2 for Engineering)
Text Sales/Info: 657-276-5093
Fax: 951-225-9246
Email: sales@morsetechinc.com





|
Front Office Hours of Operation
FAQ's
|
NEW TOOLING & JOB INQUIRIES
- New tooling & job inquiries should be directed to Sales@MorseTechInc.com and Engineering@Morsetechinc.com and contain the following:
- Tooling Specs (ie Customer Name, Part Number or Name, Drawing Number, any Revision #’s or dates, Sheet Size, Type of material, Thickness of Material Height of emboss, Type of Emboss - braille, pillow emboss, dome emboss, raised lettering, etc)
- A PDF of the print for our Sales Department. Drawings should contain a minimum of 2 registration target alignments no closer than ½” from edge with a flood coat behind them. (please refer to our guidelines previously sent to you or email sales@morsetechinc.com to receive a copy)
- An Art file for our Engineering department (Typically we require AI version 10 or lower or an EPS file but we also accept DXF, DWG, STL and PDF)
- Depending on the project you’ll be contacted by someone from either our sales or engineering department to answer your questions or gather more information.
REQUESTING AN ESTIMATE
- Once your project is ready to move forward, you may request an estimate from our Sales Department which will contain pricing and information needed for the Purchase Order you send us. We recommend obtaining an estimate when you’re a new customer. Or, you can skip and go to “Placing your Order”
Placing your order:
- Please send a PDF copy of your Purchase Order (PO) once your order is shipped or shipping to our Sales Depart at sales@morsetechinc.com . The PO should contain the following information:
- Your company name, address, telephone, email and fax
- Name, email and number of person making the request
PO# & REQUESTED IN-HOUSE DATE
- Number of Sheets you are sending (we bill by the sheet not by the number of parts), including set-up sheets
- Please include a minimum of 3 set-up sheets per order.
- Job Name and Part Number. Your tooling will be matched to this.
- If your sheets are arriving pre-punched, nothing needs to be indicated on the paperwork. If you need us to punch your registration target alignments then please indicate number of punches on a separate line.
- We charge an 11% handling charge (11% of emboss + punching costs) for sheets that contain protective paper between them.
- Shipping Information (carrier you want us to use, method – red, blue, orange, ground, etc., and account number to bill. If billing a 3rd party we will need the company name, address, zip and their account number)
- Standard tooling turnaround is typically 2 business days from point material is received in-house with purchase order, approved drawing and production sample.
- Standard embossing turn-around is typically 24 hours for up to 300 sheets and 48 hours for up to 1000 sheets once material is received in-house.
- All tooling is the property of MTI and held for the exclusive use of the Customer.
- Sheets larger than 20” x 27” or 540 Square Inches are considered to be oversized
- Dies / Tools over 19” x 26” or 494 Square Inches are considered to be oversized
RECEIPT OF YOUR ORDER
- Once your order is received in-house, our Sales Department will provide you with a confirmation Sales Order which will re-iterate all of the information on your Purchase Order along with pricing and estimated ship date. Please review the Sales Order for accuracy and if anything needs to be adjusted please notify our Sales Department at sales@morsetechinc.com.
SHIPPING:
- Our shipping department will provide a tracking number to you direct through the carrier you chose once your order is complete and shipping back to you.
- If you have questions, please contact Shipping@MorseTechInc.Com
INVOICING
- Our AR department will invoice your AP contact, typically upon completion of your job (ie when tooling is complete, when emboss is complete, and/or when a partial if requested).
- Invoices will be sent via email in PDF. Statements available upon request.
INFO FOR NEW CUSTOMERS
To set up your account in our system and move forward, we will need the following information….
- Your Company Name & Address
- Work & Fax Numbers
- Company URL
- AP Contact – Name, Number and email
- Purchasing Contact – Name, Number and email
- Art Department Contact – Name, Number and email.
- Preferred Shipping Company and Account #
- Completed Credit Card Authorization Form (please request from sales@morsetechinc.com) – NOTE: All new accounts are COD
ACCOUNT INFORMATION
- Your Account # will be located on your first invoice
- Terms: COD for first year. Customer may then apply for credit with terms of Net 30; Accounts late more than 3 times in a 12 month period are subject to COD Terms
- Payments can be made by credit card, cash or check. We also accept payment by ACH.
- Checks should be Made Payable to "Morse Technologies Inc."
- Checks should be mailed to – MTI Form-X, Attn: AR Dept, 3195 Red Hill Avenue, STE H, Costa Mesa, CA 92626
- We invoice in PDF by email. We will provide statements upon request.
If you are interested in any of the following positions, please email us with your resume at jobs@morsetechinc.com
Morse Technologies / Form-X is an established Costa Mesa Company in Southern California and is accepting resumes for the following positions:
- Embosser
Employment type: Part Time Flexible & Full Time (Shifts Monday to Friday, 9 to 5:30 pm includes 1/2 hour lunch and two 15-minute paid breaks).
Type of Employer: Manufacturing
Education Requirement: Minimum High School Graduate or Equivalent
Managing others: No
Relocation: No
Industry: Embossing
Required Travel: No
Job Description:
- Will train. Forming/Embossing Membrane Switch Graphic and Circuit Sheets. Must enjoy repetitive work. Job entails prioritizing orders. Reading sales orders, pulling the appropriate tooling and setting it up on the machine(s). Measuring of heights of embossed parts to conform to spec. Completing first article sheets and other paperwork related to the job. Keeping customer jobs in order and clean. Providing sales department with sales order once completed, and turning over completed parts to the shipping department. Sometimes responsible for receiving jobs from customers through the front door or shipping couriers through the shipping dock. Sometimes responsible for unboxing of jobs, bagging and labeling of jobs, and providing paperwork (purchase orders) to Sales Department.
- Able to read and understand work instruction in English.
- Have a cell phone and know how to text. Some positions are remote and require texting people in remote positions.
- Knowledge of measuring equipment helpful but will train (Micrometers, Calipers and Rulers)
- Good math skills.
- Good communication skills.
- Self-Starter a plus
- This job position is an active position and requires moderate lifting of up to 50 lbs. Standing for extended periods at a machine. Must be able to listen and follow instructions well. Must have a higher than average attention to detail. Be organized. Responsible. Friendly. There will be some interaction with customers or delivery drivers dropping/picking up orders. May be required to operate machinery with bright, flashing lights and/or imagery that may cause discomfort and/or seizures for those with photosensitive epilepsy.
- Job Type: Full-time
- Salary: $15.50 to $22.00 / hour based on experience level
- Other Compensations: 1 week paid vacation (2 weeks after 5 years), 5 Sick Days, Paid holidays (if UPS/FedEx closed we are closed)
- Experience: Manufacturing Experience helpful but will train right individual
- Pay Frequency: Weekly
Floater: Shipping and Punching
Employment type: Part Time Flexible & Full Time (Shifts Monday to Friday, 9 to 5:30 pm includes 1/2 hour lunch and two 15-minute paid breaks).
Type of Employer: Manufacturing
Education Requirement: Minimum High School Graduate or Equivalent
Managing others: No
Relocation: No
Industry: Embossing
Required Travel: No
Job Description:
- Will train. Receive incoming orders through shipping couriers (UPS/FedEx) at shipping dock. Some interaction with customers who deliver their own parts. Unbox orders. Place orders into plastic bags and label. Date stamp purchase orders and add required information to the paperwork as provided to you by management. Give Purchase Orders to Sales Department who will provide a Sales Order. Pull tooling for the orders. If order requires punching, then punch the job, check for accuracy of Purchase Order(PO) and Sales Order) ie number of sheets, number of punches, paper between the sheets, any discrepancies, sheets needing to be cut, etc. Once job is punched or if order does not require punching, move order to the Embossing Department with the appropriate tooling. Clean shop during down times. When jobs are complete, provide Sales department with Signed off sales order. When packing slips are ready, professionally package orders ready to ship. Create computer generated shipping labels on UPS/FedEx platforms. Move orders ready to ship to shipping dock by couriers deadlines each day.
- Able to read and understand work instruction in English.
- Have a cell phone and know how to text. Some positions are remote and require texting people in remote positions.
- Basic math skills.
- Good communication skills.
- Self-Starter a plus
- This job position is an active position and requires moderate lifting of up to 50 lbs. Sitting for extended periods of time at a machine. Must like repetitive work. Must be able to listen and follow instructions well. Must have a higher than average attention to detail. Be organized. Responsible. Friendly. There will be some interaction with customers or delivery drivers dropping/picking up orders.
- Salary: $15.50 to $18.50 / hour based on experience level. Room to grow into other positions.
- Other Compensations: 1 week paid vacation (2 weeks after 5 years), 5 Sick Days, Paid holidays (if UPS/FedEx closed we are closed)
- Experience: Shipping Experience helpful but will train right individual
- Pay Frequency: Weekly

|
Embossing Dept - Mon - Thu 6 a.m. - 5 p.m.
Email - Mon - Fri 6:00 am - 5:00 p.m.
HOLIDAY SCHEDULE:
- Closed for the Christmas / New Years Holiday from Dec 21 through Jan 2
- Closed at Noon on the Tuesday of Thanksgiving week through the Sunday of Thanksgiving week.
- Closed the business day BEFORE MLK Day, President's Day, Memorial Day, Veteran's Day, Labor Day, Easter, Independence Day (4th of July) plus the holiday day.
EMAILS:
* Sales / Quotes / General Info : Sales@morsetechinc.com
* Engineering Dept - Engineering@morsetechinc.com
* AR Dept - AR@morsetechinc.com
* AP Dept - AP@morsetechinc.com
* Shipping Questions - Shipping@morsetechinc.com
* Website Help - webmaster@form-x.com
|